HOME
ABOUT US
INDUSTRIES
PRODUCTS
TECHNICAL
CONTACT

Certificates & inspection

Independent inspection authorities

Third party inspection can be carried out by following independent inspection authorities:

  • Lloyd's Register of Shipping (LR)
  • Registro Italiano Navale (RINA)

  • Germanischer Lloyd’s (GL)
  • Moody International    
  • Det Norske Veritas  (DNV)    
  • TÜV Industrie Service
  • Bureau Veritas (BV)        
  • AIB-Vinçotte
  • Russian Maritime Register of Shipping (RMRS)   
  • SGS Industrial Service

 

Other customer specified inspection authorities, can be nominated by customers.

Certification of stainless +  nickel tubes is generally to EN 10204. The actual certificate will depend on the tube offered but will either be 3.1 or 3.2. A 3.1 or 3.2 MTC means that the actual tubes  or heat sold will have been tested and a Mill Test Certificate (MTC) will accompany the tubes. 

EN 10204 3.1 Certification

3.1 is a certificate on all our tubing issued by the mill which declares that the tubes are in compliance with the specification and includes the test results. Test results are validated by the mill’s in - house test department which has to be independent of the manufacturing department. 

EC Pressure Equipment Directive 97/23/EC ( PED )

Tubes certified to 3.1 or 3.2 are in conformity with the EC Pressure Equipment Directive 97/23/EC for main pressure-bearing parts in categories II, III and IV.

NACE MR 0175

National Association of Corrosion Engineers, is a society who gives requirements and recommendations for the selection and qualification of all kinds of steels and is dedicated to protect the environment due to reducing the economic impact of corrosion by advancing the knowledge of corrosion control. Our tubes carries the NACE MR0175, which is the standard for materials used in H2S-containing environments for the oil and gas industry. 

Merinox is a registered trademark. Merinox © 2013